Enerdrive ePOWER B-TEC 200Ah Lithium Battery Only (2023)

Product Description

Enerdrive ePOWER B-TEC 200Ah Lithium Battery, 5 Year Warranty.The New Enerdrive Generation 2 (G2)B-TEC200Ah Lithium Battery now comes with a 5 Year full replacement warranty.Enerdrive have released the new ePOWER B-TEC 200Ah Lithium Battery with new features including:

• BMS restart button for easy recovery
• RS485 communications port for advanced system integration
• Raised terminals for 360 degree cable connections
• Re-designed battery case for easy serviceability
• Battery box and straps INCLUDED - nothing more to buy!

The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Specifications

SKU EPL-200BT-12V-G2

Brand Enerdrive

GTIN 9342616019832

Product Category Batteries

Warranty Period: 5 Years

Model EPL-200BT-12V

Battery Voltage 12V

Amp Hours (ah) 200

Battery Charge Temperature 0 ̴ 45°C

Recommended Charge Current for Maximum Life ≤ 60A

Nominal Capacity 200Ah

Dimensions 505 x 172.5 x 265 mm (L x W x H)

Battery Output Voltage Range 11.00 ̴ 14.60V

Total Charge Current Max 150A @ 25°C for 30mins

Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins

Discharge Cut-off Voltage ≤ 11.20V

Maximum Charge Current 150A @ 25°C for 30mins

Nominal Voltage 12.8V

Standby (Float) Voltage 13.50 ̴ 13.80V

Battery Discharge Temperature -20 ̴ 60°C

Float 13.50 - 13.80V

Pulse Discharge Current 450A for 1.0s

Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles

Net Weight (kg) 25

Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V

Videos

Enerdrive B-TEC Lithium Batteries - Part 1 - Application

Enerdrive B-TEC Lithium Batteries - Part 2 - Specifications

Enerdrive B-TEC Lithium Batteries - Part 3 - Installation

Enerdrive B-TEC Lithium Batteries - Part 4 - Settings

Enerdrive B-TEC Lithium Batteries - Part 5 - Operation

Enerdrive B-TEC Lithium Batteries - Part 6 - Fault Finding

Why The Enerdrive 200 Amp Hour Lithium Battery Is Recommended For New Travellers

Customer Review Of The Enerdrive Lithium Battery 12V 200Ah

The Best Caravan Battery?

What Will My Camping Battery Run?

The Latest Caravan Battery by Enerdrive: The B-TEC 200Ah 12V Generation 2 Battery

Expanding Your Enerdrive B-TEC Capacity: Enerdrive Batteries in Parallel

How To: Resetting A Flat Enerdrive BTEC or eLITE Battery

Product Features: The Enerdrive 200Ah Lithium Battery

Customer Reviews

View All Reviews

Write a product review

Product Q&A

Ask Us a Question

• Do lithium batteries need to be ventilated? Any other install tips for my Enerdrive lithium battery?

  The batteries do not vent, so no need to be concerned about installing your Enerdrive Battery in a highly ventilated space.

  It is recommended to keep them in a cool dry area to increase longevity.

  Do not mount the battery on its side - it needs to be keep upright. Thanks.

  (Video) Enerdrive 200Ah Lithium Battery Features

• Why is the Enerdrive 200Ah so much more expensive than the 100Ah?

  Firstly, the 200Ah manages to hold more current in a smaller and lighterpackage. The 200Ah also is the B-Tec range, which has built in Bluetoothcapabilities. The 200ah also has benefits in being able to power higherdraw products, as it has a higher discharge rating.

• Is the 200 lithium compatible with a redarc 30 management system

  Hi There, Yes the Redarc chargers and management system are compatable with this battery.

  Cheers

• Can I connect the Enerdrive B-tec Lithium Batteries in Parallel or in series?

  Hi there,

  You cannot connect any of the EnerdriveB-TEC batteries in series. You can howeverconnect up to two only of the same size (ah) B-TEC batteries in Parallel. Enerdrive recommend that you only do this if you don't over load the max current of the internal BMS board from ONE OF THE BATTERIES.

  Example. If you connect 2 x 200AhB-TEC batteries then do not draw more than 200A of DC current from that battery bank, as one (1) single 200AhB-TEC battery is only capable of handling 200A DC.

  The main aim of connecting two (2) of the EnerdriveB-TEC batteries is not to increase your maximum DC current output, but to double your storage capacity.

  Double the storage equals double the time you can stay powered up and off the grid.

  Be sure to always consult the Enerdrive user manuals for correct cable sizing, fuse sizing and wiring diagrams.

  We now sell an Enerdrive battery bundle with a parallel kit - please CLICK HERE to find it.

• With charge capabilities of 0°-45° does the btec battery have built in protection to stay within these perameters? Or does the Enerdrive dcdc40 charger have these protections built in to safeguard the battery?

  Hi There,

  The BMS built in to the battery has over temperature protection.

  It would be up to the user to make sure the battery is installed in an area where it should not be subject to temepratures under 0C and over 45C when being charged.

• HiIn your specs you mention the 200 amp 12v lithium battery to be 265mm high.Does this include the cradle base height?Thanks

  Hi There,

  The measurements for the battery are as follows:

  Without Tray & Strap - 505mm x 173mm x 265mm

  With Tray & Strap - 505mm x 176mm x 276mm

• What size lithium batter do I need to run my 3000 w inverter Please

  Hi There,

  We would recommend the following battery to run the 3000w inverter.

  https://www.mygenerator.com.au/dcs-12v-200ah-slim-line-lithium-battery.html

• Can this battery be charged with a Redarc BCDC1240 ?

  Hi There,

  Yes, you can use the Redarc BCDC1240D to charge this battery.

• Hello I am looking at having this battery in my caravan. The company making the caravan is gong to mount the battery in the existing battery box that is mounted to the chassis on the outside. As I understand your battery requirements it needs to be insid

  Hi There

  The battery does come with a battery try and strap.

  If you are going to install into a battery box, please confirm the dimensions.

  Kind Regards

  (Video) Enerdrive B-TEC Lithium Batteries - Part 3 - Installation

• How many cells are in the Enerdrive 200Ah Btec Battery

  There are 32 (4P x 8S) Prismatic Cells in the 200Ah Btech Battery

• It is possible to connect an EPL-200Btec Slim and 200Btec in parallel?

  Unfortunately due to the variations in the internal BMS boards one can't parallel a normal 200BTec with a 200BTec Slim.

• How many cells are in the Enerdrive 200Ah Btec Battery?

  There are 32 (8x 4) Prismatic Cells in the 200Ah Btech Battery.

• What size generator should I use for charging a battery?

  The below generators are the minimum recommend sizes based on an AVR generator:

  ● 800VA 2KVA

  ● 1200VA 2.5KVA

  ● 1600VA 3KVA

  ● 3000VA 5KVA

  ● 5000VA 8KVA

  If your generator is smaller than the recommended size for your inverter/charger, you will definitely need to adjust the settings on the inverter/charger and reduce the AC input current limit, and/or a DC charge current limit to prevent overloading the generator. If you do want an inverter based generator get one that is at least 30% larger than required than an equivalent AVR based model to help prevent overloads.

• Can these chargers take solar input?

  No, the battery charging component is an AC input, meaning only AC power (mains power) can charge through this unit.

• How can I remotely monitor and control my devices?

  You need a GX device to get remote monitoring. We recommend the Cerbo GX and an RJ45 UTP cable to connect it to the inverter. You can hardwire an ethernet connection to the unit, or connect it to a Wifi signal.

Warranty

Delivery